Our technicians follow a strict 15-point checklist of inspection criteria that includes:

​

• Chimney cap and crown defects

• Creosote or heavy soot

• Damaged, blocked, or unsafe chimney flues

• Firebox safety issues (cracks , damage)

• Movement in chimneys

• Unlined chimney flues 

• Leaks or Flashing Issues

​

Most Common Signs of Chimney Damage:

​

1. Unusual white stain across the brick of a chimney?

2. Cracked or Deteriorated Mortar Joints.

3. Some smoke gets back inside your home.  

4. Cracked or Melted Crown.

5. Deteriorated Flashing.

6. Wallpaper & Paint Damage Near Your Chimney.

7. Water Leaks Inside The House From Chimney.

​

​

Why is it important to clean your chimney?

​

The job of the chimney sweep is to remove soot, blockages and built-up creosote from your chimney liner, firebox, smoke chamber and damper. This cleaning will help create a safer operation of your system during the heating system. ... Creosote can also reduce the draw of the fireplace and reduce efficiency. Chimney can attract animals and it is very important to inspect the chimney at least once a year.

​

​

What happens if you don't clean your chimney?

​

If you don't clean your chimney properly it can cause a hazardous smoke and this smoke can fill inside you house and this can cause you several problems like severe suffocation. Because of usage of the chimney the soot and rust the chimney cap can also face corrosion. Blockages in chimney are very common reason for house fires in US.

​

​

When should you clean your chimney?

​

Chimneys should be cleaned no later than the early fall, before fire burning season. If you choose to hire a chimney sweep, you can expect a quick turnaround if you have them come earlier, ideally in the summer.

​

​

Does my chimney need cleaning?

​

The Chimney Safety Institute of America (CSIA) says that fireplaces need to be cleaned when there is 1/8″ of sooty buildup inside the chimney or flue system. ... When an accumulation of soot and creosote occurs it can fuel a chimney fire that will likely damage the chimney.

​​

 

Common Chimney Repairs:

​

CHIMNEY CAP REPAIR / REPLACEMENT - A chimney cap works like an umbrella to help block rain from pouring straight down your chimney.

​

CHASE TOP REPAIRS - Top protective metal “crown” of a factory-built chimney. Great for protection from weather conditions, pest control, rust control, and debris entering the chimney. If your chase top needs a replacement, we can help you find the perfect fit.

​

CROWN REPAIRS - If your chimney crown is cracked, damaged, or improperly shaped it can allow water into the chimney and damage the masonry.

​

CHIMNEY LINER - If your home was built without a liner, we can install one if yours is deteriorating we can replace.

​

CHIMNEY LEAKS - Deteriorated flashing can cause severe damage to attic areas, walls, and ceilings. We can waterproof your chimney in order to avoid any problems in the future.

​

CHIMNEY TUCKPOINTING/REPOINTING - Mortar work can get damaged , by heat or rain . removing damaged mortar between bricks, blocks, or stone and replacing it with fresh mortar.

​

FIREBOX REPAIR - Chimney panels or fire box masonry can get cracked or damaged by the fire, we offer firebox repair, coating , panels replacement & renewing services .

​

​